1. All 3M Products
  • 3M™ Fastbond™ Contact Adhesive 2000NF Neutral, 5 gal box, 1 per case
  • 3M™ Fastbond™ Contact Adhesive 2000NF Neutral, 5 gal box, 1 per case

    3M ID 7000028591
    • Immediate bonding without heat. Immediate handling strength. Bonds flexible polyurethane and latex foams, plastic laminate, wood, plywood, particle board, fabrics, fiber, aluminum, galvanized steel and many plastics.
    • Co-sprayed with plural component, external mix spray systems – no premixing, no limited pot life. Available in blue, light orange or neutral color.
    • Not recommended for bonding bare steel surfaces (unless force dried and protected from moisture). Primed or painted steel surfaces must be thoroughly tested for corrosion and compatibility with Fastbond contact adhesive 2000-NF with spray activator #1 before use.
    • Designed to be applied between two substrates. Application to substrates that results in direct exposure of the adhesive to light may result in eventual discoloration of the exposed adhesive. Direct exposure can be controlled by proper spray application. Adhesive may soak through very thin fabrics
     More...
    Details

    3M™ Fastbond™ Contact Adhesive 2000-NF with Spray Activator #1 is a waterdispersed, high solid, activated adhesive which provides immediate bonding capabilities and handling strength without forced drying equipment for most applications.

    • Immediate bonding without heat. Immediate handling strength. Bonds flexible polyurethane and latex foams, plastic laminate, wood, plywood, particle board, fabrics, fiber, aluminum, galvanized steel and many plastics.
    • Co-sprayed with plural component, external mix spray systems – no premixing, no limited pot life. Available in blue, light orange or neutral color.
    • Not recommended for bonding bare steel surfaces (unless force dried and protected from moisture). Primed or painted steel surfaces must be thoroughly tested for corrosion and compatibility with Fastbond contact adhesive 2000-NF with spray activator #1 before use.
    • Designed to be applied between two substrates. Application to substrates that results in direct exposure of the adhesive to light may result in eventual discoloration of the exposed adhesive. Direct exposure can be controlled by proper spray application. Adhesive may soak through very thin fabrics
    Specifications
    Application Method
    Co-Spray
    Brand
    Fastbond™
    Container Size
    5 Gallon
    Environmental Considerations
    California Air Resources Board, GREENGUARD® Certified, Helps contribute to LEED® credits, Low VOC, Ozone Transport Commission, SCAQMD
    Flame Retardant
    Non-flammable
    Heat Resistance
    <230 Degree Fahrenheit
    Industries
    General Industrial, Military and Government, Specialty Vehicle, Transportation, Woodworking
    Open Time
    Up to 2 hours
    Physical Form
    Thin liquid
    Product Color
    Neutral
    Product Form
    Bulk
    Solids Weight Percent (Approximate)
    >=42.4 Percent
    Volume (Imperial)
    5 gal
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    Philippines - English