1. All 3M Products
  • 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810, Black, 48.5 mL Duo-Pak, 12/case
  • 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810, Black, 48.5 mL Duo-Pak, 12/case

    3M ID 62278814363
    • Low odor adhesive is ideal for any setting where harsh fumes or flammability are an issue
    • Provides high shear and peel strength and is toughened for impact resistance
    • 10 minute work life and 20 minute handling strength
    • Bonds oily metals with minimal surface prep
     More...
    Specifications
    Adhesive Type
    Acrylic
    Brand
    Scotch-Weld™
    Container Size
    1.64 fl oz (US)
    Full Cure
    8-24 Hours @ 72 F (22 C)
    Indoor/Outdoor
    Both
    Industries
    Metalworking, Signage, Specialty Vehicle, Woodworking
    Physical Form
    Flowable Liquid
    Position
    Best
    Product Form
    Each
    Product Type
    Acrylic Adhesive
    Shear Strength at 72 Degrees F (22 Degrees C)
    3600 psi
    Shelf Life in Months (from date of manufacture)
    12
    Storage Temperature
    32 F (0 C)
    Viscosity
    Self-Leveling
    Volume (metric)
    48.5 mL
    Work Time
    10 Minutes
    Details

    3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is a toughened two-part, room-temperature curing acrylic adhesive specially formulated to bond oily metals, plastics, and other surfaces. With lower odor and non-flammable properties, 3M™ Scotch-Weld™ Acrylic Adhesive DP810 contributes to a safer work environment compared to typical acrylic adhesives.

    When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

    Provides High Shear and Peel Strength and is Toughened for Impact Resistance
    This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet demanding end-use applications. Making work safer, faster, and more efficient, that's just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The acrylic adhesive cures to a tan or black color.

    Recommended Applications

    • Sporting goods (metal to metal, metal to plastic bonding)
    • Appliance manufacturing (metal to metal, metal to glass)
    • Electronic casing assembly

    10 Minute Work Life and 20 Minute Handling Strength
    With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is approved under UL 746C, polymeric materials use in electrical equipment.

    Easy Adhesion with Acrylic
    Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. H

    • Low odor adhesive is ideal for any setting where harsh fumes or flammability are an issue
    • Provides high shear and peel strength and is toughened for impact resistance
    • 10 minute work life and 20 minute handling strength
    • Bonds oily metals with minimal surface prep
    • Bonds most plastics, composites and metals
    Large Volume Order
    • All fields are required unless indicated optional

    •  
    • 3M will process, collect, store, use and transfer your personal data for such purposes in accordance with 3M’s Privacy.

    • Submit

    Thank You

    Your form was submitted successfully!

    Our Apologies...

    An error has occurred while submitting. Please try again later...

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    Philippines - English