1. Philippines
  2. All 3M Products
  3. Adhesives, Sealants & Fillers
  4. Structural Adhesives
  5. Two Part Structural Adhesives
  6. 3M™ Scotch-Weld™ Epoxy Adhesive DP420NS Black, 37 mL, 12 per case

3M™ Scotch-Weld™ Epoxy Adhesive DP420NS Black, 37 mL, 12 per case

3M ID 62329914352
  • High peel and shear strength maintains lasting bond at high and low temperatures
  • Toughened for impact and fatigue resistance
  • 20 minute work life provides time for positioning and adjustment
  • Non-sag formulation ensures adhesive stays where applied
 More...
View all details
Details

3M™ Scotch-Weld™ Epoxy Adhesive DP420NS is a black, toughened, non-sag, two-part epoxy structural adhesive that provides good strength along with high impact and fatigue resistance to meet demanding bonding challenges. 3M™ Scotch-Weld Epoxy Adhesive DP420NS can replace mechanical fasteners, screws, rivets and spot welds in many applications.

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

3M™ Scotch-Weld™ Epoxy Adhesive DP420NS
Bonds stainless steel shaft into stainless steel club head
High Peel and Shear Strength Maintains Lasting Bond at High and Low Temperatures
Our 3M™ Scotch-Weld™ Epoxy Adhesive DP420NS maintains bond strength at high and low temperatures and can withstand paint bake operations up to 400°F for 60 minutes. It works well on a variety of substrates such as metals, ceramics, wood, glass, many composites and plastics, and is an excellent indoor bonding agent for joining, gluing, potting, panel bonding, and structural bonding. 3M™ Scotch-Weld™ Epoxy Adhesive DP420NS meets the requirements for UL 94 HB.

Recommended Applications
  • Small joint assembly
  • Heavy-duty mounting assembly
  • Metalworking
  • Carbon fiber epoxy bonding
20 Minute Work Life Provides Time for Positioning and Adjustment
3M™ Scotch-Weld™ Epoxy Adhesive DP420NS reaches handling strength in approximately two hours and is fully cured in 24 hours (at 72°F/22°C.) The mix ratio is 2:1 and provides a 20 minute work life, providing time to adjust for desire

  • High peel and shear strength maintains lasting bond at high and low temperatures
  • Toughened for impact and fatigue resistance
  • 20 minute work life provides time for positioning and adjustment
  • Non-sag formulation ensures adhesive stays where applied
Specifications
Adhesive Type
Epoxy
Brand
Scotch-Weld™
Design Challenges
Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
Full Cure
24 Hours @ 72 F (22 C)
Hardness
75-80 Shore D
Indoor/Outdoor
Both
Industries
Construction, Consumer Goods, Electronics, General Industrial, Metalworking, Military and Government, Signage, Specialty Vehicle, Transportation, Woodworking
Open Time
20 min @ 72 °F (22 °C)
Physical Form
Flowable Liquid
Position
Best
Product Form
Cartridge
Product Type
Epoxy Adhesive
Shear Strength at 72 Degrees F (22 Degrees C)
4500 psi
Shelf Life in Months (from date of manufacture)
15
Storage Temperature
60-80 F (16-27 C)
Substrate 1
Aluminum, Bare Metal, Ceramic, Epoxy - Fiber Reinforced, Glass, Glass & Ceramics, Metal, Paint, Polyolefin Foam, Stainless Steel, Wood
Substrate 2
Aluminum, Bare Metal, Ceramic, Epoxy - Fiber Reinforced, Glass, Glass & Ceramics, High Surface Energy, (400-1100 Dynes/cm), Metal, Paint, Polyolefin Foam, Stainless Steel, Wood
Viscosity
Non-sag
Volume (metric)
37 mL