1. Philippines
  2. All 3M Products
  • 3M™ Scotch-Weld™ Acrylic Adhesive DP8405NS, Green, 45 mL Duo-Pak, 12/case
  • 3M™ Scotch-Weld™ Acrylic Adhesive DP8405NS, Green, 45 mL Duo-Pak, 12/case

    3M ID 62285614459
    • 5 minute work life with 20 minutes to structural strength
    • Durable bond with excellent shear, peel and high impact strength
    • Bonds to a variety of surfaces, including most metals and plastics
    • High strength with minimal surface prep
     More...
    View all details
    Details

    3M™ Scotch-Weld™ Acrylic Adhesive DP8405NS is a non-sag, tough, two-part acrylic adhesive. This toughened product provides improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product that features a fast rate of strength build to provide structural strength in just minutes.

    When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

    Non-Sag with Excellent Shear, Peel and Impact Strength
    3M™ Scotch-Weld™ Acrylic Adhesive DP8405NS is a non-sag acrylic adhesive with a 10:1 mix ratio. It features a 5 minute work life to allow time to position substrates prior to adhesion. This working life, open time and cure length can be accelerated with heat. Once fully cured, this adhesive will reach 1,000 psi (7 MPa) of overlap shear strength in approximately 19 minutes, increasing throughput and productivity while featuring a high peel and impact performance.

    Recommended Applications

    • Metalworking such as HVAC, appliance, sporting goods, and specialty vehicles
    • Sign manufacturing such as panel to frame bonding, trim attachment, letter bonding, and frame assembly
    • Bonding plastics, composites and powder coats to metal
    • Typically used where fast assembly of smaller parts is required

    3M™ Scotch-Weld™ Acrylic Adhesive DP8405NS Green has been recognized by Underwriters Laboratories (UL) for use in electrical equipment and electric signs. Please review UL File QOQW2. MH17478 and Sign Components Manual (SAM) File E464624 for details.

    3M™ Scotch-Weld™ Acrylic Adhesive DP8405NS Green should yield similar results as 3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS Green, which has been tested for surface flammability, smoke, toxic gas generation, and caloric content per ASTM E162, ASTM E662, ASTM E1354, Bombardier SMP 800-C, and Boeing BSS 7239 test methods.

    5 Minute Work Life with 19 Minutes to Structural Strength

    • 5 minute work life with 20 minutes to structural strength
    • Durable bond with excellent shear, peel and high impact strength
    • Bonds to a variety of surfaces, including most metals and plastics
    • High strength with minimal surface prep
    • Features spacer beads to control bond line thickness
    Specifications
    Adhesive Type
    Acrylic
    Application Temperature From (Celsius)
    -40 Degree Celsius
    Application Temperature To (Celsius)
    90 Degree Celsius
    Brand
    3M™
    Consumer Label
    No
    Design Challenges
    Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
    Full Cure
    24 Hours @ 73 F (23 C)
    Indoor/Outdoor
    Both
    Industries
    Aerospace, Appliance, Automotive, Construction, Consumer Goods, Electronics, General Industrial, Metalworking, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
    Open Time
    4-6 minutes @ 72 F (22 C)
    Physical Form
    Flowable Liquid
    Position
    Best
    Product Form
    Cartridge
    Product Type
    Acrylic Adhesive
    Shear Strength at 72 Degrees F (22 Degrees C)
    4100 psi
    Shelf Life in Months (from date of manufacture)
    18
    Storage Temperature
    72 Degree Fahrenheit
    Substrate 1
    ABS, Acrylic, Glass & Ceramics, Metal, Nylon, Painted Surface, Easy-to-Bond (HSE), Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), PVC, Wood & Hardboard
    Substrate 2
    ABS, Acrylic, Glass & Ceramics, Metal, Nylon, Painted Surface, Easy-to-Bond (HSE), Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), PVC, Wood & Hardboard
    Viscosity
    Non-Sag
    Volume (metric)
    45 mL
    Work Time
    4-6 Minutes