1. Philippines
  2. All 3M Products
  3. Adhesives, Sealants & Fillers
  4. Structural Adhesives
  5. Two Part Structural Adhesives
  6. 3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS, Green, 45 mL Duo-Pak, 12/case

3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS, Green, 45 mL Duo-Pak, 12/case

3M ID 62286014451
  • 11 minute work life with 36 minutes to structural strength
  • Durable bond with excellent shear, peel and high impact strength
  • Bonds to a variety of surfaces, including most metals and plastics
  • High strength with minimal surface prep
 More...
View all details
Details

3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS is a non-sag, tough, two-part acrylic adhesive. This toughened product provides improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product that features a fast rate of strength build to provide structural strength in just minutes.

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

Non-Sag with Excellent Shear, Peel and Impact Strength
3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS is a non-sag acrylic adhesive with a 10:1 mix ratio. It features an 11 minute work life to allow time to position substrates prior to adhesion. This working life, open time and cure length can be altered with heat to decrease the cure time. Once fully cured, this adhesive will reach 1,000 psi (7 MPa) of overlap shear strength in approximately 36 minutes, increasing throughput and productivity while featuring a high peel and impact performance. Full cure will be reached within 24 hours.

Recommended Applications

  • Metalworking such as HVAC, appliance, sporting goods, and specialty vehicles
  • Sign manufacturing such as panel to frame bonding, trim attachment, letter bonding, and frame assembly
  • Bonding plastics, composites, painted and powder coated metal
  • Typically used where fast assembly of smaller parts is required

3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS Green has been recognized by Underwriters Laboratories (UL) for use in electrical equipment and electric signs. Please review UL File QOQW2. MH17478 and Sign Components Manual (SAM) File E464624 for details.
3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS Green has been tested for surface flammability, smoke, toxic gas generation, and caloric content per ASTM E162, ASTM E662, ASTM E1354, Bombardier SMP 800-C, and Boeing BSS 7239 test methods.

10 Minute Work Life with 38 Minutes to Structural Strength
With non-sag properties you're

  • 11 minute work life with 36 minutes to structural strength
  • Durable bond with excellent shear, peel and high impact strength
  • Bonds to a variety of surfaces, including most metals and plastics
  • High strength with minimal surface prep
  • Features spacer beads to control bond line thickness
Specifications
Adhesive Type
Acrylic
Brand
Scotch-Weld™
Design Challenges
Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
Full Cure
24 Hours @ 73 F (23 C)
Indoor/Outdoor
Both
Industries
Composite, Consumer Goods, Electronics, General Industrial, Marine, Metalworking, Military and Government, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
Maximum Operating Temperature (Celsius)
149 Degree Celsius
Open Time
10 min @ 72 °F (22 °C)
Physical Form
Flowable Liquid
Position
Best
Product Form
Cartridge
Product Type
Acrylic Adhesive
Shear Strength at 72 Degrees F (22 Degrees C)
4100 psi
Shelf Life in Months (from date of manufacture)
18
Storage Temperature
72 Degree Fahrenheit
Substrate 1
ABS, Acrylic, Aluminum, Engineered Thermoplastics, Epoxy - Fiber Reinforced, Glass & Ceramics, Metal, Nylon, Painted Surface, Easy-to-Bond (HSE), Plastic (ABS, PVC, Acrylic), Plastic (Flexible Vinyl), Plastic (High Performance Nylon), Polyolefin Foam, PVC, Stainless Steel, Thermosets - Fiber Reinforced, Wood & Hardboard
Substrate 2
ABS, Acrylic, Aluminum, Engineered Thermoplastics, Epoxy - Fiber Reinforced, Glass & Ceramics, Metal, Nylon, Painted Surface, Easy-to-Bond (HSE), Plastic (ABS, PVC, Acrylic), Plastic (Flexible Vinyl), Plastic (High Performance Nylon), Polyolefin Foam, PVC, Stainless Steel, Thermosets - Fiber Reinforced, Wood & Hardboard
Viscosity
Non-sag
Volume (metric)
45 mL
Work Time
10 - 12 min