1. Philippines
  2. All 3M Products
  3. Adhesives, Sealants & Fillers
  4. Structural Adhesives
  5. Two Part Structural Adhesives
  6. 3M™ Scotch-Weld™ Epoxy Adhesive 2216NS, Tan, Part A, 5 Gallon Drum (Pail)

3M™ Scotch-Weld™ Epoxy Adhesive 2216NS, Tan, Part A, 5 Gallon Drum (Pail)

3M ID 62337885305
  • Non-sag properties provides greater bond line control than other non-sag epoxies
  • Very flexible bond is resistant to extreme shock, vibration and flexing, making it ideal for potting and applications in the transportation industries
  • Maintains a strong bond under expansion, contraction, and limited movement while retaining good strength after environmental aging
  • Excellent for cryogenic bonding applications or adhering substrates that will be exposed to extreme cold
 More...
View all details
Details

3M™ Scotch-Weld Epoxy Adhesive 2216NS is a flexible, non-sag, two-part epoxy adhesive that cures at room temperature. It provides a high strength bond with both high shear and peel strength while remaining highly flexible, making it ideal for applications where vibration and thermal expansion and contraction are common. It also withstands very cold temperatures without becoming brittle.

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

Non-Sag Properties Provides Greater Bond Line Control
3M™ Scotch-Weld Epoxy Adhesive 2216NS is a non-sag version of our 3M™ Scotch-Weld Epoxy Adhesive 2216. It is designed for applications where high performance and flexible bonds are required. Its flexibility makes it ideal for applications involving dissimilar surfaces and where differing coefficients of thermal expansion are a consideration. Once fully cured the epoxy maintains an extremely strong bond under expansion, contraction and limited movement while also maintaining a good retention of strength over time and after environmental aging. With a 2:3 mix ratio it is a low viscosity epoxy. It flows smoothly for accurate dispensing. Both the base and accelerator are coded in contrasting colors to ensure you know which half of the product you are using.

Recommended Applications

  • Hard disk drive component assembly
  • Potting where expansion and thermal changes may occur, such as solar panels and other construction applications
  • Military bonding applications, for example bonding parts on movable transports
  • Bonding ceramic, most plastics and glass to metal
  • Attaching various substrates to masonry and stone
  • Excellent for Cryogenic Bonding Applications

Our 3M™ Scotch-Weld Epoxy Adhesive 2216NS is designed to perform under extremely frigid temperatures. Because it can withstand temperatures up to -423°F/-252°C it is ideal for cryogenic bonding applications. At room temperature it offers a 90 minute work life to allow for repositioning and adjustments. It will slo

  • Non-sag properties provides greater bond line control than other non-sag epoxies
  • Very flexible bond is resistant to extreme shock, vibration and flexing, making it ideal for potting and applications in the transportation industries
  • Maintains a strong bond under expansion, contraction, and limited movement while retaining good strength after environmental aging
  • Excellent for cryogenic bonding applications or adhering substrates that will be exposed to extreme cold
  • Medium viscosity help minimize running, dripping, or migration while also self-leveling
  • Versatile bonding agent will adhered a wide variety of similar and dissimilar substrates, including metals and masonry
  • Can be heat cured to reduce curing times from 7 days to as a little as 30 minutes
Specifications
Adhesive Type
Epoxy
Brand
Scotch-Weld™
Full Cure
7 Days @ 72 F (22 C)
Hardness
65-70 Shore D
Industries
Construction, Consumer Goods, Electronics, General Industrial, Military and Government, Specialty Vehicle, Transportation
Open Time
120 minutes @ 72 F (22 C)
Physical Form
Paste
Product Form
Gallon
Product Type
Epoxy Adhesive
Shear Strength at 72 Degrees F (22 Degrees C)
2500 psi
Shelf Life in Months (from date of manufacture)
24
Storage Temperature
72 Degree Fahrenheit
Substrate 1
EPDM Rubber, Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Rubber (Except EPDM), Wood & Hardboard
Substrate 2
EPDM Rubber, Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Rubber (Except EPDM), Wood & Hardboard
Viscosity
Non-Sag