1. Philippines
  2. All 3M Products
  3. Adhesives, Sealants & Fillers
  4. Flexible Adhesives
  5. Water-based Adhesives
  6. 3M™ Fastbond™ Contact Adhesive 2000NF Neutral, 5 gal box, 1 per case

3M™ Fastbond™ Contact Adhesive 2000NF Neutral, 5 gal box, 1 per case

3M ID 7000028591UPC 50021200313375
  • Immediate bonding without heat. Immediate handling strength. Bonds flexible polyurethane and latex foams, plastic laminate, wood, plywood, particle board, fabrics, fiber, aluminum, galvanized steel and many plastics.
  • Co-sprayed with plural component, external mix spray systems – no premixing, no limited pot life. Available in blue, light orange or neutral color.
  • Not recommended for bonding bare steel surfaces (unless force dried and protected from moisture). Primed or painted steel surfaces must be thoroughly tested for corrosion and compatibility with Fastbond contact adhesive 2000-NF with spray activator #1 before use.
  • Designed to be applied between two substrates. Application to substrates that results in direct exposure of the adhesive to light may result in eventual discoloration of the exposed adhesive. Direct exposure can be controlled by proper spray application. Adhesive may soak through very thin fabrics
 More...
View all details
Details

3M™ Fastbond™ Contact Adhesive 2000-NF with Spray Activator #1 is a waterdispersed, high solid, activated adhesive which provides immediate bonding capabilities and handling strength without forced drying equipment for most applications.

  • Immediate bonding without heat. Immediate handling strength. Bonds flexible polyurethane and latex foams, plastic laminate, wood, plywood, particle board, fabrics, fiber, aluminum, galvanized steel and many plastics.
  • Co-sprayed with plural component, external mix spray systems – no premixing, no limited pot life. Available in blue, light orange or neutral color.
  • Not recommended for bonding bare steel surfaces (unless force dried and protected from moisture). Primed or painted steel surfaces must be thoroughly tested for corrosion and compatibility with Fastbond contact adhesive 2000-NF with spray activator #1 before use.
  • Designed to be applied between two substrates. Application to substrates that results in direct exposure of the adhesive to light may result in eventual discoloration of the exposed adhesive. Direct exposure can be controlled by proper spray application. Adhesive may soak through very thin fabrics
Specifications
Application Method
Co-Spray
Brand
Fastbond™
Environmental Considerations
California Air Resources Board, GREENGUARD® Certified, Helps contribute to LEED® credits, Low VOC, Ozone Transport Commission, SCAQMD
Flame Retardant
Non-flammable
Heat Resistance
<230 Degree Fahrenheit
Industries
General Industrial, Military and Government, Specialty Vehicle, Transportation, Woodworking
Open Time
Up to 2 hours
Physical Form
Thin liquid
Product Color
Neutral
Product Form
Bulk
Solids Weight Percent (Approximate)
>=42.4 Percent