3M™ Cold Shrink QT-III Termination Kit 7673-S-8

For 72.5 kV Class terminations, trust in 3M Cold Shrink QT-III Termination Kits 7673-S Series. Part of 3M’s Core Technology Platform, the 3M 7673-S Series kits lets you make safe, single-phase terminations on a variety of power cable – from tape shield, longitudinally corrugated (LC) and jacketed concentric neutral (JCN) cable, to tape-over-wire (TOW) and wire-over-tape (WOT) shielded cable. For areas with higher contamination, the 3M 7673-S-10 Series termination kit provides additional skirts and water-blocking materials to give you a longer creepage path. The complete termination is made up of 4 sub-assemblies: the Silicone Rubber Skirted Stress Control Assembly, Hi-K Stress Control Adapter Assembly, Silicone Rubber Lug Seal Assembly and Silicone Rubber Ground Seal Assembly. Following installation, the support cores can be recycled. When the job requires a cold shrink delivery system, you need the 7673-S Series 3M Cold Shrink QT-III Termination Kit. Our cable accessory products are 100% factory-tested and backed by our strong reputation. Kit Contents: Each kit contains sufficient quantities of the following materials as appropriate to make one single-phase termination (lug not included unless requested in advance). - Silicone Rubber Skirted Stress Control Assembly - Hi-K Stress Control Adapter Assembly - Lug Seal Tube - Lug Seal Tube - Ground Seal Tube - Ground Strap Assembly - Constant Force Springs - Tubes 3M™ Red Compound P55/R (Non-Silicone Grease) - Scotch Electrical Shielding Tape 24 - 3M™ Scotch-Seal™ Mastic Sealing Tape 2229 - 3M™ EMI Copper Foil Shielding Tape 1181 - Scotch Vinyl Electrical Tape Super 88 - 3M™ Cable Cleaning Pads CC-3 - Scotch® Self-fusing Silicone Rubber Electrical Tape 70 - Instruction Sheets

For areas with higher contamination, 3M™ Cold Shrink QT III 7673 S Series termination kits provide additional skirts and water blocking materials to give you a longer creepage path. The complete termination is made up of 4 sub assemblies: the Silicone Rubber Skirted Stress Control Assembly, Hi K Stress Control Adapter Assembly, Silicone Rubber Lug Seal Assembly and Silicone Rubber Ground Seal Assembly. Following installation, the support cores can be recycled. When the job requires a cold shrink delivery system, you need the 7673 S Series 3M Cold Shrink QT III Termination Kit.