Philippines
All 3M Products
Electrical
Power Cable Connectors
Power Cable Terminations
3M™ Cold Shrink QT-II Indoor Termination Kit 5625K, 15 kV, 1.09"-1.80" (27,2-45,7mm) Cable Insul. O.D., 3 Terms/Kit, 1 Kits/Case

3M™ Cold Shrink QT-II Indoor Termination Kit 5625K, 15 kV, 1.09"-1.80" (27,2-45,7mm) Cable Insul. O.D., 3 Terms/Kit, 1 Kits/Case

3M ID 7100041431
UPC 00051128608937

Voltage	5 kV, 8 kV, 15 kV
Insulation Outer Diameter (metric)	27.686 mm, 27.94 mm, 28.194 mm, 28.448 mm, 28.702 mm, 28.956 mm, 29.21 mm, 29.464 mm, 29.718 mm, 29.972 mm, 30.226 mm, 30.48 mm, 30.734 mm, 30.988 mm, 31.242 mm, 31.496 mm, 31.75 mm, 32.004 mm, 32.258 mm, 32.512 mm, 32.766 mm, 33.02 mm, 33.274 mm, 33.528 mm, 33.782 mm, 34.036 mm, 34.29 mm, 34.544 mm, 34.798 mm, 35.052 mm, 35.306 mm, 35.56 mm, 35.814 mm, 36.068 mm, 36.322 mm, 36.576 mm, 36.83 mm, 37.084 mm, 37.338 mm, 37.592 mm, 37.846 mm, 38.1 mm, 38.354 mm, 38.608 mm, 38.862 mm, 39.116 mm, 39.37 mm, 39.624 mm, 39.878 mm, 40.132 mm, 40.386 mm, 40.64 mm, 40.894 mm, 41.148 mm, 41.402 mm, 41.656 mm, 41.91 mm, 42.164 mm, 42.418 mm, 42.672 mm, 42.926 mm, 43.18 mm, 43.434 mm, 43.688 mm, 43.942 mm, 44.196 mm, 44.45 mm, 44.704 mm, 44.958 mm, 45.212 mm, 45.466 mm, 45.72 mm
Number of Conductors	1
Breakout Boot	No
Suitable for High Voltage	No

For Tape, Wire, an UniShield® Shield Cable.

5 kV to 15 kV

Insulation OD: 1.09–1.80" (27,7–45,7 mm)

View more details

Details

Highlights

For Tape, Wire, an UniShield® Shield Cable
5 kV to 15 kV
Insulation OD: 1.09–1.80" (27,7–45,7 mm)
Provides a void-free seal to tape shield, wire shield and UniShield® power cables

3M™ Cold Shrink QT-II terminations provide easy installation for a broad spectrum of indoor and outdoor applications. The Cold Shrink QT-II termination is based on specially formulated, track-resistant silicone rubber insulators with built-in Hi-K stress relief. The insulators are pre-stretched around a spiral -wound, plastic core. When the terminator is slipped over a properly prepared cable and the core is removed, the terminator immediately shrinks to the cable`s dimensions. The result is a void-free, flexible seal without special tools or torches.

3M™ Cold Shrink QT II 5620K & 5630K Series Termination Kits are designed for terminating solid dielectric shielded, medium voltage power cables. The QT II termination uses high dielectric constant (High K) stress control tube insulated with a UV stable, track resistant, silicone insulator. The track resistant, hydrophobic propertities of the silicone rubber minimize leakage currents. Meets the requirements of IEEE Standard 48, for Class 1 for outdoor, weather exposed environments.

Typical Properties

Details

Support

Ask a 3M Expert

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.